Posts Tagged ‘of’
Rapid Fire-How to mod 360 controller-NEW And EASIER than ever
READ THIS!!!!!!!!!!!!!!!
**** For finish product look- http://s717.photobucket.com/albums/ww176/pearceman20/ ***
check out my longboard video
if you need to know what a resistor is look at this picture it is the silver thing in the very middle!!!
http://arkadesticks.com/hackedpads/Xbox360wired.jpg
Add me(I rub NIPLE5, or
NGGAS r Crazys1) I am not racist i am just a person that likes a laugh and it is a conversation starter .
this mod works with players 1-4 not only 1 like the other mod.
It takes less wire to use
it is quicker and much less complicated
Tools needed-
30 Gage wire
Soldering iron and solder
Momentary push buttons
torch screw driver-used to open xbox controller
20mins
Try to get the SMALLEST buttons you can find but if you can any size will work as long as it fits inside the controller
Songs-
Nth Degree
Zap Zap
i hope this was helpful thank you for watching
Duration : 0:5:48
How to make a Rapid Fire Controller
How to make a rapid fire controller
Taking apart your controller will void your warranty and im not responsible if your controller breaks
You will need:
soldering iron
solder
wire (usb cable, hook up wire, 22-24 gauge)
mini momentary switch
Duration : 0:5:7
Energizer Lithium 1AA LED Light by U.S. Cavalry
Find this item at: www.uscav.com The Energizer e2® Lithium LED 1 AA flashlight gives you the perfect amount of light every time. With its advanced Azoteq IQ tailcap switch, simply press and hold until you reach the desired lighting level. At the lowest level, the Energizer e2 Lithium 1AA will flash to let you know you are at the lowest output level. If you continue to hold the tail switch, the output level will increase back to the maximum output of 65 lumens. The Energizer e2 Lithium 1AA …
Duration : 0:2:18
FENIX Flashlight LD20 CREE Q5 LED…
Fenix LD20…
https://www.fenix-store.com/product_info.php?products_id=362
Features:
Utilizes a Premium (Q5) Cree 7090 XR-E LED with a life of 50,000 hours
Two modes of output, selected by turning the bezel (patented)
General Mode: 9 lumens (71hrs) – 47 lumens (13hrs) – 94 lumens (5hrs) – SOS
Turbo Mode: 180 lumens (2hrs) – Strobe
36 days of survival use (2 continuous hours per day on the lowest setting)
Digitally Regulated for Constant Brightness
Uses two 1.5V AA ( Alkaline, NiMH, Lithium ) batteries (not included), inexpensive and widely available
150mm (L) x 21.5 mm (D)
Removable titanium-coated steel pocket clip
Made of T6 aircraft grade aluminum
Durable Type III hard anodized finish
56-gram (or 2.0 oz) weight (excluding batteries)
Waterproof to IPX-8 Standards
Toughened ultra clear glass lens with AR coating
Push-button tail cap switch
Capable of standing up securely on a flat surface to serve as a candle
Batteries not included
Includes a holster, a lanyard, two spare o-rings, and a rubber switch boot
Operation
Fully press to switch on and turn the bezel to select the General Mode or the Turbo Mode. A soft-press anytime while the light is on will change the brightness levels of a certain mode. Keep the light off for over 2 seconds, the light will turn completely off, and the regulative circuit will be restored.
MSRP: $79.00
[ignore this]
THE USE OF ANY COPYRIGHTED MATERIAL IS USED UNDER THE GUIDELINES OF “FAIR USE” IN TITLE 17 § 107 OF THE UNITED STATES CODE. SUCH MATERIAL REMAINS THE COPYRIGHT OF THE ORIGINAL HOLDER AND IS USED HERE FOR THE PURPOSES OF EDUCATION, COMPARISON, AND CRITICISM ONLY. NO INFRINGEMENT OF COPYRIGHT IS INTENDED.
Duration : 0:2:57
How to make a lag switch
things you need:
-internet cable(wal-mart)
-screw driver(wal-mart)
-light switch or push button(radio shack)
-somthing sharp(wal-mart)
-tape(wal-mart)
Duration : 0:3:25
How to mod xbox 360 controller
This video will show you how to mod your controller. Send a message if you have any questions.
P.S. I got all my supplies at radioshack. Rosin-core solder, mini screwdriver, wire, momentary push-button. Those four total about $10-$20. And yes, the normal trigger still works like it always used to, a plain old trigger. P.P.S. I’m sorry, but i had to remove the comments, cuz people were putting some stupid stuff up there. And I am not responsible for any damage done to you or your controller. Enjoy.
Duration : 0:10:38
How to Make a Rapid Fire xbox 360 controller
How to Make a Rapid Fire xbox 360 controller
Resistor: You must have this to mod your controller. It only comes on the newer controllers. The controller that came with your Xbox will NOT work!!!
Materials:
You need:
Wireless Controller
Resistor
Momentary push button
24 gauge wire – Most small wire will work
Soldering Iron
Soldering Wire
Optional:
T8 screw Driver
Soldering Experience – Practice with old remote controls
Yes This works with Halo 3, but not with all guns. I have not yet tried it with Gears Of War 2, so I’m not much help there. The controller works GREAT with Call Of Duty 4, it does not work with Call Of Duty: World At War
Duration : 0:9:42