Posts Tagged ‘controller’
pushbutton switches, motor control – rotary phase converter
allen bradlyey 800T-B push buttons, NEMA type. bought on ebay, all eight of these are normally closed (”stop type”) push buttons; I didn’t realize that when purchased ‘em – I figured they’d all have four rear tabs, two for NO and two more screw-tabs for NC contact use. too bad I was wrong. what a DRAG!
see these switches, and all my OTHER rotary converter parts, in crystal clear photos here:
http://machines.netai.net/rotary_converter_parts/
I had to open up one switch (used a dremel, etc) and repositioned the 2 tiny contacts, then used a blowtorch and #11 Xacto knife to “melt in” two new tiny rectangular holes for the side studs, then reassembled the switch.
so now I have 7 switches of the normally closed/momentary open “off” type, and ONE that’s the normally open/momentary closed “off” type…hardest part was relocating the tiny rectangular holes in the clear plastic…
remember: I’m always willing to *SWAP* tools, hardware, and shop stuff for stuff on my wants list…including, of course, swapping -your- spare rotary converter parts for MY spare rotary converter parts, or your stuff for some of my (eighteen tons) of other hardware and tools, all of which you can see here
http://machines.50webs.com/alpha/
and you can see my “wants list” right at the bottom of the page link above, or here (if the page is too long and has too dang many items to scoll down through)
http://machines.50webs/com/alpha/#wants_list
thanks for stopping in today 
Duration : 0:5:31
How to make a Rapid Fire Controller
How to make a rapid fire controller
Taking apart your controller will void your warranty and im not responsible if your controller breaks
You will need:
soldering iron
solder
wire (usb cable, hook up wire, 22-24 gauge)
mini momentary switch
Duration : 0:5:7
How to make a Rapid Fire controller for your xBox 360 ( Very Easy )
Please leave some coments and rate! If you have any questions, feel free to ask.
This only works with Call of Duty 4
**At 3:16, it is RE-ASSEMBLE** (I made a mistake)
Duration : 0:3:36
How to mod xbox 360 controller
This video will show you how to mod your controller. Send a message if you have any questions.
P.S. I got all my supplies at radioshack. Rosin-core solder, mini screwdriver, wire, momentary push-button. Those four total about $10-$20. And yes, the normal trigger still works like it always used to, a plain old trigger. P.P.S. I’m sorry, but i had to remove the comments, cuz people were putting some stupid stuff up there. And I am not responsible for any damage done to you or your controller. Enjoy.
Duration : 0:10:38
How to Make a Rapid Fire xbox 360 controller
How to Make a Rapid Fire xbox 360 controller
Resistor: You must have this to mod your controller. It only comes on the newer controllers. The controller that came with your Xbox will NOT work!!!
Materials:
You need:
Wireless Controller
Resistor
Momentary push button
24 gauge wire – Most small wire will work
Soldering Iron
Soldering Wire
Optional:
T8 screw Driver
Soldering Experience – Practice with old remote controls
Yes This works with Halo 3, but not with all guns. I have not yet tried it with Gears Of War 2, so I’m not much help there. The controller works GREAT with Call Of Duty 4, it does not work with Call Of Duty: World At War
Duration : 0:9:42